Expand description
The register addresses the driver reads and writes, from Table 12-1.
Constants§
- ANA_LNA
- An analog LNA control whose lowest bit Semtech’s drivers clear to draw a random number.
- ANA_
MIXER - An analog mixer control whose top bit Semtech’s drivers clear for the same reason.
- EVENT_
MASK - The event mask the implicit header timeout workaround clears.
- IQ_
POLARITY - The IQ polarity setup, bit 2 of which the inverted IQ workaround sets.
- LORA_
SYNC_ WORD - The most significant byte of the LoRa sync word; the least follows at 0x0741.
- OCP_
CONFIGURATION - The over current protection level.
- RANDOM_
NUMBER - The first of four bytes of random number, filled while the receiver listens.
- RTC_
CONTROL - The RTC control register the implicit header timeout workaround stops.
- RX_GAIN
- The receive gain.
- TX_
CLAMP_ CONFIG - The PA clamping configuration the antenna mismatch workaround raises.
- TX_
MODULATION - The TX modulation register, bit 2 of which the 500 kHz workaround sets.
- XTA_
TRIM - The trimming capacitor on the XTA pin.
- XTB_
TRIM - The trimming capacitor on the XTB pin.