Whether the INT pin is active high.
Whether a conversion has completed since the register was last read.
The fault-count code, 0..=3, for one, two, four, or eight faults.
Whether the result went above the high limit.
Whether the result went below the low limit.
Whether the INT pin latches until the configuration register is read.
Whether a conversion takes 800 ms rather than 100 ms.
Whether the limit registers carry a mantissa alone, without an exponent.
The mode code: 0 shutdown, 1 single shot, 2 continuous.
Whether the last result overflowed its range.
The full-scale range number, 0..=11, or 12 to set the range automatically.
An OPT3001 configuration register, field by field.