Interface LoraRadioWiring

Where a radio module is wired on a Linux board.

interface LoraRadioWiring {
    busyLine?: number;
    gpioChip: string;
    resetLine: number;
    spi: string;
    spiHz?: number;
}

Properties

busyLine?: number

The line an SX126x's BUSY pin is on. The SX127x has no BUSY pin.

gpioChip: string

The GPIO chip the lines are on, /dev/gpiochip0 for a Raspberry Pi's header.

resetLine: number

The line the module's reset pin is on, the BCM GPIO number on a Raspberry Pi.

spi: string

The SPI device file, one per chip select, such as /dev/spidev0.0.

spiHz?: number

The SPI clock in hertz, 2 MHz when omitted.