Whether the ALERT pin is active high.
Whether the ALERT pin reflects data ready rather than the alert flags.
The averaging code, 0..=3.
The conversion-cycle code, 0..=7.
Whether a conversion has completed since the register was last read.
Whether an EEPROM write is still in progress.
Whether a result went above the high limit.
Whether a result went below the low limit.
The conversion-mode code: 0 continuous, 1 shutdown, 3 one-shot.
Whether writing this triggers a software reset.
Whether the limits act as a therm hysteresis band rather than as alerts.
A TMP117 configuration register, field by field.