Module sim 

An INA226 that is not there.

As with the INA219, a current monitor’s current and power registers count in steps the calibration sets, so reporting takes the same shunt and largest current a driver is given with with_shunt. The part carries TI’s manufacturer id and the INA226 die id, and its mask/enable register keeps the three flags the part sets for itself, with the conversion-ready flag set, so every conversion reads as finished. part carries 500 mA at 12 V through the 100 mΩ shunt sized for 3.2 A a driver starts with.

Constants

BUS_MICROVOLTS

The bus voltage part reports, in microvolts.

MAX_MICROAMPS

The largest current part is sized for, in microamps.

MICROAMPS

The current part reports, in microamps.

SHUNT_MILLIOHMS

The shunt part sits across, in milliohms.

Functions

part

An INA226 answering at an address, carrying MICROAMPS at BUS_MICROVOLTS through SHUNT_MILLIOHMS.

reporting

An INA226 that reads what it is asked to.